Derui – Complete Test Equipment for Two-Wheelers & E-Scooters

02/03/2025
STEM DURABILITY STARTS WITH THE RIGHT TEST SETUP Scooter Stem Fatigue Testing Built Around Your Specimen A meaningful stem fatigue result depends on more than reaching a cycle count. Where the scooter is restrained, where the load is applied and how movement is measured all affect the result. Discuss Derui’s scooter stem fatigue test machine for repeated-load evaluation of a stem or steering column assembly. Define the test boundary and loading programme first, then review the fixtures, drive arrangement, controls and measurement configuration for your project. The objective is a repeatable laboratory test with records your engineering and quality teams can interpret. Design verification Compare structural variants Evaluate alternative stem sections, joints or assembly settings under the same documented conditions. Quality control Keep comparisons consistent Use a repeatable mounting and inspection procedure for supplier samples or production checks. Equipment selection Make the scope clear Agree on the specimen, working envelope, data and acceptance checks before committing to a configuration. Specimen & fixturesLoading programmeConfigurationRecords & acceptanceFAQs Specimen Fit: Define What Is Being Tested Provide a drawing or photographs showing the complete scooter or stem subassembly, handlebar interface, extension height and lower mounting points. Include the intended test position of telescopic sections and any locking or folding joint. Preserve the intended load path Identify the force application point and its distance from the restraint. A changed lever arm changes the bending moment. Avoid adding an extra support that bypasses the joint or tube section being evaluated. Document the restraint conditions Specify whether the deck, fork, axle or a dedicated specimen interface is restrained. Record clamp positions, tightening settings and alignment so that a later test can reproduce the setup. For a folding design, distinguish a locked joint subjected to repeated structural loading from a mechanism repeatedly folded and unfolded. These are different…
